NASTT New Events

Tue, 02/26/2019

When

Tuesday, February 26, 2019 from 8:00 AM to 5:00 PM PST
Add to Calendar 

Where

Bridgeport Room, Radisson Hotel Vancouver Airport 
8181 Cambie Road
Richmond, BC V6X 3X9
  

 
Driving Directions  

Contact

Charlotte Wong 
NASTT-BC 
604-767-1673 
charlottenapwong@gmail.com 
 

 NASTT Horizontal Directional Drilling Good Practices  Course

Course Details:

NASTT is pleased to co-sponsor its HDD Good Practices Guidelines Course with NASTT -BC Chapter on February 26, 2019  from 8:00 am to 5:00 pm at the Raddison Hotel Vancouver Airport in Richmond, BC.

NASTT's Mission: Quality Education and Training Programs:

It is NASTT’s mission to advance trenchless technology and to promote its benefits for the public and the environment by offering quality educational training programs on various trenchless methods. NASTT will deliver a comprehensive, consensus-based course outline that is non-commercial and academically oriented. NASTT instructors are experts and respected leaders in their fields of expertise.

* Continuing Education Units (CEUs) are offered for attendee participation.

Course Objectives:

The HDD Good Practices Guidelines course provides an in-depth overview of Horizontal Directional Drilling (HDD) and covers six topics: (1) operation and application; (2) equipment and materials; (3) planning, including surface and geological investigations, utility surveys, bore planning, and regulations and permitting; (4) jobsite safety; (5) risk reduction, trouble shooting and mitigation; and (6) design.

 NASTT Course Instructors:

Matthew Wallin is a Partner and Senior Project Manager with Bennett Trenchless Engineers located in Folsom, California. Matthew holds both Bachelor's and Master’s degrees in Civil Engineering from Case Western Reserve University in Cleveland, Ohio. Matthew has focused his practice on geotechnical engineering and the design and construction management of new pipeline projects using horizontal directional drilling, microtunneling, open-shield pipe jacking, pipe ramming, and auger boring.

Dr.Jason Lueke, P.Eng. has nearly 20 years of experience in consulting, construction, education, and research focusing specifically on trenchless engineering and construction. Prior to rejoining Associated Engineering in 2012, he served three and a half years as an Assistant Professor and Senior Sustainability Scientist in the Del E. Webb School of Construction at Arizona State University teaching soil mechanics and researching trenchless methods, infrastructure utility design, and buried infrastructure management. Jason has participated as an engineer or contractor on a variety of trenchless projects involving pipe bursting, horizontal directional drilling, cured in place pipe relining, auger boring, pipe ramming, and tunneling.

Course Fees:

Price per applicant is $500.00 CAD. Registration link below.

NASTT’S HDD Good Practices Course Agenda

7:45am          Breakfast

8:00am           Opening Remarks & Introductions

8:15am           Course Overview & Background

8:30am                HDD Application & Processes

-Cable and pipe installations for electric, fiber optic, CTV, gas, water, sewer (including gravity)

-Diameters from 2 to 65 in. (steel, HDPE, PVC, DIP)

-Lengths over 10,000 ft. +, but less than 1,000 ft. more common

-Installation beneath streets, rivers, bays, other obstacles, through soft soils to hard rock

-Plot bore, including bore tracking

-Reaming

-Pullback of product

-Connections, demobilization and cleanup/site restoration

9:30am                HDD Equipment and Materials

-Types of rigs (small, medium, large)

-Thrust/Pullback and rotational torque characteristics

-Introduction to various models of rigs

10:15am                 Break

10:30am                 HDD Tooling

-Machine Performance, Capabilities, and Application Guidelines

-Drill Pipe

-Drill Bits and Downhole Tools

-Product Pipe

-Cable/Pipe Pulling Devices/Swivels

-Drilling Fluid Delivery, Recovery, and Containment Systems

-Drilling Fluid and Additives

11:15am              Bore Tracking & Equipment

11:45am              Lunch

1:00pm                HDD Design

-Surface Investigation

-Utility Survey

-Geotechnical Site Investigations

-Permits and Requirements

-Construction Method Selection

-Impact to Residents, Business, and Traffic

-Constrained Work Areas- Rig Relocation

-Design Analysis and Calculations

-Contact Grouting

-Conductor Casings

-Plans and Specifications

-Safety Plan

2:45pm                Break

3:00pm                Overview of Drilling Fluids

-Mixing Systems

-Holding Tanks

-Cleaning Systems

-Equipment for Containment, Collection, and Disposal

-General Drilling Fluid Functions and Properties

-Circulation

-Annular Volume

-Lost Circulation

-Drillling Fluid Pump Efficiency

-Drilling and Reaming Penetration Rates

-Field Tests for Drilling Fluid & Slurry Analysis

4:00pm    Bore Planning

-Locates

-Site Walkover & Calibration of Transmitter/Receiver

-Bore Planning Tools

-Selection of Appropriate Equipment and Tooling

-Site Geometry, Topography, and Constraints

-Schedule Constraints (Project Completion, Work Hr)

-Drilling Fluid Support System

4:30pm                In-class Evaluation

5:00pm                Course Adjourns


* Breakfast and Lunch provided!

Tue, 02/26/2019

When

Tuesday, February 26, 2019 from 8:00 AM to 5:00 PM PST
Add to Calendar 

Where

Cambie Room, Radisson Hotel Vancouver Airport 
8181 Cambie Road
Richmond, BC V6X 3X9
  

 
Driving Directions  

Contact

Charlotte Wong 
NASTT-BC 
604-767-1673 
charlottenapwong@gmail.com 

NASTT Cured-In-Place Pipe (CIPP) Good Practices  Course

Course Details:

NASTT is pleased to co-sponsor its CIPP  course with NASTT- BC Chapter on February 26, 2019 from 8:00 am to 5:00 pm at the Raddison Hotel Vancouver Airport in Richmond, BC.

NASTT's Mission: Quality Education and Training Programs:

It is NASTT’s mission to advance trenchless technology and to promote its benefits for the public and the environment by offering quality educational training programs on various trenchless methods. Our instructors are experts and respected leaders in their fields of expertise. NASTT will deliver a comprehensive, consensus-based course outline that is non-commercial and academically oriented. NASTT intstructors are experts and respected leaders in their field of expertise. 

*Continuing Education Units (CEUs) are offered for attendee participation.

Course Objectives:

Cured-In-Place Pipe (CIPP) technology is an effective trenchless pipeline rehabilitation method that may help address many of your city’s water wastewater problems. CIPP is one of the most widely used and accepted pipeline rehabilitation methods. It significantly reduces infiltration and ex-filtration. CIPP is cost effective and increases flow capacity. And because it is trenchless, traffic congestion and site disruption are significantly reduced.

NASTT Course Instructors:

Chris Macey is the Senior Technical Director, Water Infrastructure Management for AECOM and their global Technical Practice Network leader for the Condition Assessment and Rehabilitation of Linear Infrastructure. Chris has worked on the application of trenchless and minimum excavation technologies to rehabilitate underground infrastructure in cities across North America for over 30 years. Chris has had hands-on experience in the application of CIPP technology for over 25 years. 

Kaleel Rahaim is a graduate Chemical Engineer from Mississippi State University. He has experience in many different aspects of Engineering such as project and process engineering and has been involved in the thermoset polymer industry for over 30 years. He recently retired from being the Business Manager, Pipeline Remediation Polymers for the Thermoset Resins Division of Interplastic Corporation.

Course Fees:

Price per applicant is $500.00 CAD. Registration link below.


NASTT’s CIPP Good Practices Course Agenda:

7:45am      Breakfast

8:00am     Opening Remarks & Part 1 – Introduction

9:00am     Part 2 – Design & Construction of CIPP

-Description, history & methods 

10:00am   Break

10:15am   Part 3 – CIPP Application Range in Trenchless Technologies

-Types of pipelines used in CIPP process

 -Practical size, shape & length limitations

 -Types of CIPP materials

- Basics of how CIPP interacts with other materials

-Typical problems that can be addressed using CIPP

 -Practical advice on where, when and how to apply CIPP liners

11:15am  Part 4 – CIPP Testing

-Liner properties for liner design

-Liner compatibility with waste stream 

-Design requirements

12:00pm   Lunch

1:00pm     Part 5 – Design Considerations for Gravity Pipelines

-Wall thickness for a CIPP liner

 -Existing pipeline problems

 -Problem(s) in the liner’s design

1:45pm     Part 6 – Key Notes for a Successful Project

 -Selection of right materials & process

-Design by an experienced, registered engineer

 -Clear & detailed well-written tender & contract specifications

 - Field quality control & quality assurance program

2:45pm    Break

3:00pm    Part 7 – Inspection & QA/QC

-Compliance with by-laws & safety regulations

-Contract specifications

 -Documentation

 -Protection of owner’s interests

 -Public relactions

4:00pm   Q&A Period, Closing Remarks & Course Evaluations

4:30pm    Course Adjourned

* Breakfast and Lunch are provided!